MasterSeal HLM 5000 R
MasterSeal HLM 5000 R is a single-component, moisture curing, polyurethane based waterproofing membrane that cures by reaction with atmospheric moisture to form a tough membrane. MasterSeal HLM 5000 R protects structures from water penetration while remaining flexible to handle the nominal expansion and contraction of substrates.
| Application Temperature | : | -40 to 120 deg F |
| Boiling Point | : | 153.33 to 371.11 deg C |
| Compositions | : | 1, 2, 4-trimethylbenzene, Calcium Oxide, Distillates (petroleum), Dibutyltin Dilaurate, Distillates (petroleum), Hydrotreated Light Naphthenic, Hydrotreated Heavy Naphthenic, Solvent Naphtha, Stoddard Solvent, Talc |
| Curing Time | : | 24 to 28 hr |
| Density | : | 10.3 lb/gal |
| Drying Time | : | <12 to 24 hr |
| Flash Point | : | 123 deg F |
| Form | : | Liquid |
| Odor/Scent | : | Aromatic |
| Resists | : | Bacterial Attack |
| Tensile Strength | : | >2 MPa |
| Viscosity | : | 5000 to 15000 cPs |
| Color | : | Black |
| Net Content | : | 5 gal |
| Container Type | : | Pail |
- Waterproofing exterior concrete and plywood
- Exterior below grade on concrete and masonry
- Above grade between two course of concrete or masonry and cavity walls
- Waterproof, protects structure from water penetration
- Elastomeric, permits nominal expansion and contraction of the structure
- Low temperature flexibility, wide service temperature , suitable for all climates
- Single component, no complex mixing and easy-to-use
- Cold applied and seamless, eliminates lapping, seaming and pre-cutting
Specification Sheet
