DIG's premium quality 1/2 in (0.600 ID x 0.700 OD) poly drip tubing is available in lengths of 50 ft, 100 ft, 200 ft, 500 ft and 1000 ft. The poly drip tubing, commonly referred to as drip irrigation tubing, blank tubing, distribution tubing. PE tubing or drip hose is used as the primary drip irrigation installation supply line, into which micro tubing, drip emitters, drip line or micro sprinklers are attached to deliver water to the plant areas. DIG's durable drip irrigation tubing is made with low-density polyethylene resin material with a minimum of 2% plus carbon black for extra resistance to the damaging effects of ultraviolet rays. DIG poly drip tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength to meet every demand of drip irrigation system installations above or below grade.
| Color | : | Black |
| Inside Diameter | : | 0.6 in |
| Length | : | 2 ft |
| Outside Diameter | : | 0.7 in |
| Pressure Rating | : | 60 psi |
| Suitable for | : | 1/2 in Compression Fittings |
| Wall Thickness | : | 1/2 in |
| Material | : | LDPE |
- Contains a minimum of 2% concentrated carbon black resin antioxidant to protect the poly drip tubing from thermal degradation
- The poly drip tubing made with premium low density polyethylene resin exhibits a combination of outstanding environmental stress-cracking resistance and burst strength
- The poly drip tubing can meet any demand for above and below grade micro irrigation systems for gardening, landscape and agricultural installations
- DIG poly drip tubing and micro tubing are made in the USA
Catalog