HILLMAN 838618
Shaft collars are commonly used as mechanical stops, locating components and/or bearing faces within mechanical systems. They are easy to adjust with set screws. Shaft collars create a tight fit and greater holding power without the damage normally caused by set screws alone. To install, simply slide these collars on to a shaft and tighten the set screw to hold the collar in place.
| Bore Diameter | : | 3/8 in |
| Finish | : | Zinc-Plated |
| Outside Diameter | : | 3/4 in |
- Effective on both hard and soft material shafts
- Easily installed where major assembly/disassembly would otherwise be required
- Zinc-plated for improved corrosion resistance
- Part of the Hillman deep drawer program