GRK's R4™ self-countersinking screw has a patented underhead with saw-blade like cutting teeth and six self-contained cutting pockets. Together they act similar to a circular saw-blade, transporting the drill dust away from the edge of the screw hole while cutting a perfectly clean hole into even the most brittle materials without cracking any surface treatment. This design enhances the R4's versatility by allowing the fastener to countersink into even the hardest woods. The head of the screw closes the hole off with precision leaving no damaged fibers around the head. R4™ screws 2 in and longer have a four threaded CEE thread. This enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily. It increases the screw's drawing strength and reduces the friction on the screw shank that lowers the driving torque.
California residents see Prop 65 WARNINGS
| Length | : | 2-3/4 in |
| Thread Type | : | W-Cut |
| Drive Type | : | Recessed Star |
| Point Type | : | Zip-Tip |
| Material | : | Steel |
| Package Quantity | : | 100 PK |
| Thread Length | : | 1-7/8 in |
| Drive Size | : | T25 |
| Applicable Materials | : | Cedar, Lumber, Redwood |
| Shear Strength | : | 428 lb |
| Tensile Strength | : | 627 lb |
| Includes | : | 1 in Bit |
- Recessed star drive for zero stripping, with six points of contact
- CEE THREAD™ enlarges hole to reduce splitting
- W-CUT™ for low torque, faster drive
- ZIP-TIP™ ensures no pre-drilling and faster penetration
- Cutting pockets provide a clean hole, reduces splitting and bore with precision
- Case hardened steel for high tensile, torque and shear strength
- Climatek™ coating is AC257 code approved for use in treated lumber
Catalog