DIG DSR
DIG 1/2 in FPT x 0.7 in compression tee sprinkler riser to drip conversion kit is used to convert a 1/2 in sprinkler riser into a low-flow drip irrigation zone. The DSR includes a 1/2 in conversion adapter, a 25 psi preset pressure regulator and a 0.7 in OD swivel tee with a washer or filter to start a drip irrigation system for landscape plantings or lawn replacement from any 1/2 in sprinkler riser. Constructed of UV-resistant, high-impact molded plastic, the conversion kit allows a 1/2 in sprinkler riser to serve as the point of connection from the 1/2 in riser to 1/2 in dripline or drip tubing. The 25 psi pressure regulator reduces the outgoing pressure, providing protection to the zone.
| Color | : | Black |
| Includes | : | 1/2 in Adapter, 25 psi Pressure Regulator, Swivel Tee with Washer/Filter |
| Material | : | Plastic |
| Specifications | : | 100 psi Pressure Rate, 5 gpm Flow Rate, 1/2 in FNPT Inlet, 60 Mesh Screen, 130 deg F Temperature |
- Converts a 1/2 in male pipe thread riser to a 2-way 0.7 in OD compression connection
- Includes a 1/2 in adapter, 25 psi pressure regulator and swivel tee with washer/filter
- Use as a starting point to connect drip line or drip tubing into 1/2 in riser
- Allows the start of a drip irrigation zone from any sprinkler riser
- Reduces incoming water pressure to the ideal working pressure for a drip system
- Simple and easy solution for starting a drip irrigation system
- Provides flexibility in converting a 1/2 in riser into a drip irrigation zone in a few steps
- Secure and easy installation of drip line or drip tubing without glue or clamps
- The tee’s black insert fits all drip line or polyethylene drip tubing with 0.67 in OD, 0.7 in OD and 0.704 in OD
- High-strength plastic construction with UV protection for durability and long life
Catalog